Alignment Scissor Lift DUO CM 4200 Kgs
Scissors Lift Duo CM 4.2 Features
- Scissor lift for on-ground installation
- Very robust and well-established design with a high vehicle throughput and optimum service life in mind
- High lateral stability and bending strength, so also excellently suited to precise wheel alignment
- Runways equipped with pre-integrated guide rail for axle lift
- Latches and cylinder racks as extra safety feature
- Cables and hydraulic hoses installed safely within scissor pipes
- Low drive-on height for simple use
- An elevated lifting height in excess of 2 m makes repair works and access easier
- EMERGENCY OFF function in the case of power failure
- Additional anti-corrosion treatment of lock seams, cavity sealing
4200 KG LOAD CAPACITY
- Varnished with high-quality powder coating: gentian blue, RAL 5010
- Automatic synchronisation of runways and the optional wheel-free jack
- Protected within the lifting cylinders, the maintenance-free integrated displacement measurement encoder (‘linear-absolute measuring system’) eliminates the need for light barriers for synchronisation monitoring and electric switches for lift height detection
- High level of safety due to immediate switch-off in case of (one-sided) collision with obstacle at minimum height difference
- Crushing and shearing protection due to CE stop
- Stops automatically upon rising to desired lifting height with custom programmable breakpoint
- Robust membrane keyboard
- Slanted runways available for easy drive-on and drive-off
- Optional dual latch for chassis alignment as a means of added stability within the scissor arm (not available in combination with wheel-free jacks)
- Reduced lifting/lowering time available
Standard Delivery:
- Scissor lift, type: DUO CM 4.2 A
- Operation desk with control and hydraulic unit
- Lockable main switch
- 2 long drive-on ramps, 2 roll bars
- 2 pneumatic quick-action couplings installed on runway
- Cover plates for cables and hydraulic hoses
- 8 rope loops to be used as a transport aid
- Operating manual and test log
- EC CE declaration of conformity
- Transport packaging
Technical Data
| Load capacity CE | 4200 kg |
| Load capacity CE with wheel-free jack | 4200 kg |
| Lifting height max. | 2075 mm |
| Raising / Lowering time (load-dependent) approx. | 40 s / 40 s |
| Drive-on height | 240 mm |
| Full travel | 1850 mm |
| Operating pressure | 190 bar |
| Motor power | 2.5 kW |
| Fuse gG | 16 A |
| Power supply | 3/N/PE 400 V 50 Hz |
| Dimensions packaging (L x W x H) | 4500 mm x 800 mm x 800 mm |
| Dimensions total (L x W x H) | 5900 mm x 2075 mm x 240 mm |
| Runway dimensions (L x W x H) | 4400 mm x 617 mm x 126 mm |
| Runway length, optional | 4800 mm |
| Weight | 2650 kg |
| Weight incl. packaging | 2700 kg |
| Hydraulic fluid quantity (not included in standard delivery) | 40 l |
