Service Scissor Lift Twin F IV 3500 Kgs
LIFT TWIN F IV Features
- Double scissor lift for on-ground installation with extremely low drive-over height
- High level of operating comfort due to continuously adjustable support plate length, no subsequent pushing of the vehicle required
- Support plates and pull-outs granule-coated for optimum protection against vehicle slippage
- Double the safety due to two redundant cylinders on each side of the scissors
- No compressed air required to operate the lifting platform
- Full lifting power even from the bottommost lifting height range thanks to innovative cylinder lift-out support
- Quiet setting in the lowest position due to lowering delay installed as standard
- Soft start from the lowest position for gentle attachment to the vehicle
- High level of lateral stability due to generously sized scissor arms
- No mechanical connection between the scissors, so no trip edges
- Simple EMERGENCY OFF function in the event of power failure
Varnished with high-quality powder coating
- gentian blue, RAL 5010 (support plates)
- anthracite grey, RAL 7016 (scissors, ground frame, operation desk)
- Base frame with dual-layer powdered varnish boosts corrosion-resistance
- Fully automatic synchronisation of support plates and high level of safety due to cylinder distance measurement system (“linear absolute measurement system”)
- Crushing / shearing protection due to CE stop
- Optionally long drive-over ramps for lowered vehicles
Technical Data
| Load capacity CE | 3500 kg |
| Lifting height max. | 1960 mm |
| Lengthways holder extendible in locking positions | 1400 mm – 2000 mm |
| Crosswise holder (created by reconnecting) | 880 mm – 1820 mm |
| Size of support plate (L x W) | 355 mm x 400 mm |
| Raising / Lowering time (load-dependent) approx. | 30 s / 20 s |
| Installation depth | 2382 mm |
| Piston centers | 1350 mm |
| Post dimensions, square | 180 mm |
| Operating pressure | 160 bar |
| Motor power | 3 kW |
| Fuse gG | 16 A |
| Power supply | 3/N/PE 400 V 50 Hz |
| Control unit (H x W x D) | 320 mm x 220 mm x 120 mm |
| Hydraulic fluid quantity (not included in standard delivery) | 28 l |
